Certified CNC Machinist - 1st Shift

Posted 3 hours ago
GKN Aerospace
Fantastic challenges. Amazing opportunities.

GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, we’re inspired by the opportunities to innovate and break boundaries. We’re proud to play a part in protecting the world’s democracies. And we’re committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 32 manufacturing sites in 12 countries we serve over 90% of the world’s aircraft and engine manufacturers and achieved sales of £3.6bn in 2025. There are no limits to where you can take your career.

Job Summary

Independently set up, verify, operate, monitor, and troubleshoot CNC machining centers and routers used to produce precision aerospace transparency components, tooling, fixtures, and related work in accordance with approved programs, drawings, specifications, routers, and work instructions.

Apply verified CNC training and demonstrated machine-specific competency on Zimmermann, Thermwood, Heian, Fadal, and comparable 3-axis, 4-axis, or 5-axis equipment. Protect product safety, approved configuration, material identity, dimensional conformity, surface quality, traceability, equipment condition, and on-time delivery throughout machining operations.

Perform disciplined setup, program prove-out, workholding and tooling verification, first-piece and in-process inspection, documentation, safe recovery, and operator-level machine care while stopping and escalating any condition that could affect personnel, equipment, product, or customer requirements.

1st Shift: 5:45am PST - 2:15pm PST

Job Responsibilities

  • CNC Setup and Program Verification
  • Set up and operate Zimmermann, Thermwood, Heian, Fadal, and comparable 3-axis, 4-axis, or 5-axis CNC machining equipment within documented qualification and authorization.
  • Confirm job identity, material, current drawing and specification revisions, router or traveler requirements, approved CNC program, machine selection, tooling, fixtures, and inspection plan before setup.
  • Load and verify approved programs; establish machine zero, work coordinate systems, fixture offsets, and tool length or diameter compensation as applicable.
  • Perform controlled dry run, single-block, reduced-feed, or other approved prove-out methods; verify travel, clearances, orientation, approach, cutter path, and safe start position before full operation.
  • Tooling, Workholding and Machining Execution
  • Select, inspect, install, touch off, and verify cutting tools, toolholders, collets, probes, fixtures, clamps, vacuum workholding, spoilboards, sacrificial materials, and related setup components.
  • Verify part support and retention before machining, particularly for large, thin, curved, flexible, or high-value work where distortion, vibration, movement, or loss of vacuum could affect safety or conformity.
  • Monitor feeds, speeds, spindle load, tool condition, chip or dust removal, coolant or air systems where applicable, vacuum performance, sound, finish, and machine behavior throughout the cycle.
  • Pause work and obtain authorized support when encountering unexpected machine motion, potential collision, loss of workholding, program ambiguity, drawing conflict, damaged tooling, abnormal equipment condition, or nonconforming output.
  • Inspection, Product Quality and Traceability
  • Perform first-piece, in-process, and final operator inspections using calibrated calipers, micrometers, height gauges, indicators, bore gauges, pin gauges, templates, and other authorized inspection equipment.
  • Interpret engineering drawings, GD&T, datum structures, tolerances, surface or edge requirements, setup sheets, specifications, and acceptance criteria applicable to the assigned work.
  • Record actual results and required traceability completely and accurately; maintain positive identification and segregation of conforming, suspect, scrap, rework, and nonconforming material.
  • Do not alter programs, dimensions, inspection results, process requirements, or acceptance criteria without documented authorization through the applicable change or disposition process.

(cont...)

  • Aerospace Production and Controlled Work
  • Protect approved configuration, product safety, material identity, lot or serial traceability, controlled documentation, inspection gates, and customer-specific requirements during machining and handling.
  • Follow requirements for contamination prevention, part protection, surface preservation, controlled storage, protective film or masking, foreign-object prevention, and damage-free movement of parts, tooling, and fixtures.
  • Handle technical, program, customer, and production information in accordance with applicable security, export-control, access, and information-handling requirements.
  • Support audit readiness by maintaining current qualifications, accurate records, controlled tools and documents, and objective evidence of setup, inspection, and escalation.
  • Equipment Care, Safety and Material Handling
  • Complete required operator-level preventive maintenance, lubrication, cleaning, inspection, startup, shutdown, and daily machine checks; document and report concerns promptly.
  • Follow machine guarding, emergency-stop, lockout/tagout, PPE, housekeeping, lifting, rigging, forklift, overhead-crane, dust or chip control, and material-specific safety requirements.
  • Keep work areas, machine interiors, controls, tools, gauges, fixtures, vacuum systems, and access areas clean, organized, protected, and ready for safe use.
  • Operate only equipment for which current training, certification, authorization, and any required license have been completed.
  • Production Records, Team Support and Improvement
  • Maintain accurate labor, production quantity, machine status, setup, downtime, inspection, scrap, rework, material usage, and traceability records in required systems and documents.
  • Communicate job status, constraints, abnormalities, quality concerns, tool needs, maintenance issues, and schedule risk at shift handoff and through established escalation channels.
  • Train or assist other employees when assigned and authorized, using approved work instructions, safe methods, and consistent qualification expectations.
  • Participate in root-cause analysis, corrective action, setup reduction, tooling improvement, visual management, preventive maintenance, 5S, and other approved continuous-improvement activities.

Required Qualifications

  • Completion of a formal CNC Machinist certificate or credential from an accredited community college, technical school, registered apprenticeship program, NIMS-aligned program, or other employer-approved program.
  • Three or more years of CNC machining experience, including independent setup and operation of CNC machining centers or routers.
  • Demonstrated ability to read engineering drawings, routers, work instructions, specifications, setup sheets, and tool or work offsets and to apply GD&T, datum structures, tolerances, inspection requirements, cutter compensation, program verification, and basic CNC troubleshooting.
  • Demonstrated ability to use calipers, micrometers, height gauges, indicators, bore gauges, pin gauges, and other required inspection tools.
  • Demonstrated ability to select and verify tooling, fixtures, clamps, vacuum workholding, coordinate systems, offsets, and safe prove-out methods for assigned machines and work.
  • Ability to follow written and verbal instructions accurately, maintain complete production and quality records, and work independently within authorized procedures.
  • Ability to lift and handle materials, tooling, fixtures, or workpieces up to 50 pounds using safe techniques and required assistance or material-handling equipment.
  • Ability to obtain and maintain required forklift authorization and complete required overhead-crane training.
  • Ability to pass the applicable CNC machining test in accordance with Article 11, Section 11.4.3 of the collective bargaining agreement, subject to HR and Labor Relations validation.
  • Must satisfy applicable position-specific employment eligibility, site-access, export-control, and security requirements.

Preferred Qualifications

  • Hands-on setup and operation experience with Zimmermann, Thermwood, Heian, Fadal, or comparable multi-axis machining equipment.
  • Experience machining acrylic or polymer transparency components, tooling, fixtures, molds, patterns, trim profiles, or other large-format or precision aerospace work.
  • Experience with vacuum workholding, spoilboards, large or flexible parts, probing, multi-axis setup, cutter compensation, and collision-avoidance practices.
  • Knowledge of aerospace quality expectations, including AS9100, product safety, configuration control, traceability, nonconformance control, calibrated inspection, and foreign-object prevention.
  • Experience in high-mix, regulated manufacturing using ERP/MES, electronic work instructions, CNC program control, digital inspection records, or machine-monitoring systems.
  • NIMS credentials, registered apprenticeship completion, or additional technical training in CNC programming, machining technology, metrology, GD&T, or multi-axis machining.

Physical and Work Environment Requirements

  • Work is performed on-site in an active manufacturing environment around CNC machines, moving equipment, cutting tools, fixtures, chips or dust, noise, lubricants or coolants where applicable, and large or heavy workpieces.
  • The role requires standing, walking, bending, reaching, frequent gripping, fine hand control, visual inspection, computer or control-panel use, and sustained attention during setup and machine operation.
  • Must safely lift and handle items up to 50 pounds and use required team-lift, hoist, crane, forklift, cart, or other material-handling methods when the task or load requires them.
  • Must wear required PPE and comply with machine guarding, lockout/tagout, emergency response, housekeeping, material-specific, and area-specific safety controls.
  • Shift flexibility and overtime may be required to support production priorities, machine recovery, training, qualification, and customer commitments.

We’ll offer you fantastic challenges and amazing opportunities. This is your chance to be part of an organisation that has proven itself to be at the cutting edge of our industry; and is committed to pushing the boundaries even further. And with some of the best training on offer in the industry, who knows how far you can go?

A Great Place to work needs a Great Way of Working

Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles we’ve created a culture where everyone feels welcome to contribute. It’s a culture that won us ‘The Best Workplace Culture Award’. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work.

We’re also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know.

We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology.
Login to Apply Now